Figure 53. Installing a 2 x 2.5-inch rear drive module cooling fan
Next steps
1.
Install the 2 x 2.5-inch rear drive module air
2. Follow the procedure listed in
Removing a 4 x 2.5-inch rear drive module cooling fan
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3.
Remove the 4 x 2.5-inch rear drive module air
Steps
Press the orange release tab and lift the rear drive module cooling fan to disconnect from the connector on the rear drive
module.
104
Installing and removing system components
shroud.
After working inside your
Safety
instructions.
Before working inside your
shroud.
system.
system.