Installing the internal USB card
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the expansion card
Steps
1. Connect the USB key to the internal USB card.
NOTE:
For information about the exact location of USB on system board, see
section.
2. Align the internal USB card with the connector on the system board and press firmly until the internal USB card is seated.
Figure 233. Installing the internal USB card
Next steps
1.
Install the expansion card
2. Follow the procedure listed in
3. While booting, press F2 to enter System Setup and verify that the system detects the USB memory key.
Safety
instructions.
Before working inside your
risers.
risers.
After working inside your
system.
system.
Installing and removing system components
System board jumpers and connectors
283