Dell PowerEdge R760 Installation And Service Manual page 206

Figure 171. Riser 4R
1. Slot 7
2. Slot 8
NOTE: The expansion-card slots are not hot-swappable.
The following table provides guidelines for installing expansion cards to ensure proper cooling and mechanical fit. The expansion
cards with the highest priority should be installed first using the slot priority indicated. All the other expansion cards should be
installed in the card priority and slot priority order.
Table 133. Expansion card riser configurations
Configurations Expansion card
risers
Config1. 6 x8 FH + 2 R1B
x16 LP
R2A
R3B
R4B
Config2. 4 x8 FH R1Q
(Gen5) + 2x 8FH + 2
x16 LP
R2A
206 Installing and removing system components
PCIe Slots Form factor
1 Full height
2 Full height
3 Low profile
6 Low profile
4 Full height
5 Full height
7 Full height
8 Full height
1 Full height
2 Full height
3 Low profile
Controlling Slot's electrical
processor bandwidth/
physical
connector
Processor 1 PCIe Gen4 x8 (x16
connector)
Processor 1 PCIe Gen4 x8 (x16
connector)
Processor 1 PCIe Gen4 x16 (x16
connector)
Processor 2 PCIe Gen4 x16 (x16
connector)
Processor 2 PCIe Gen4 x8 (x16
connector)
Processor 2 PCIe Gen4 x8 (x16
connector)
Processor 2 PCIe Gen4 x8 (x16
connector)
Processor 2 PCIe Gen4 x8 (x16
connector)
Processor 1 PCIe Gen5 x8 (x16
connector)
Processor 1 PCIe Gen5 x8 (x16
connector)
Processor 1 PCIe Gen4 x16 (x16
connector)