Installing The System Cover - Dell PowerEdge R760 Installation And Service Manual

Figure 32. Removing the system cover
Next steps
1. Replace the system cover.

Installing the system cover

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. Ensure that all internal cables are connected and routed properly, and no tools or extra parts are left inside the system.
Steps
1. Align the tabs on the system cover with the guide slots on the system and slide the system cover.
2. Close the system cover release latch.
3. Using a 1/4-inch flat head or Phillips #2 screwdriver, rotate the lock clockwise to the lock position.
Safety instructions.
Before working inside your system.
Installing and removing system components 83