Dell PowerEdge R760 Installation And Service Manual page 14

Table 5. Rear view of the system (continued)
Item Ports, panels, or slots
12 OCP NIC card (optional)
13 NIC ports (optional)
14 Power supply unit (PSU1)
Figure 9. Rear view of the system with optional liquid cooling
Table 6. Rear view of the system with optional liquid cooling
Item Ports, panels, or slots
1 PCIe expansion card riser 1
(slot 1 and slot 2)
2 BOSS blank
3 PCIe expansion card riser 2
(slot 3 and slot 6)
4 PCIe expansion card riser 3
(slot 5)
5 Coolant tubes
6 PCIe expansion card riser 4
(slot 7)
7 Power supply unit (PSU2)
8 USB 2.0 port
9 USB 3.0 port
14 System overview
Icon Description
NOTE:
hold the System ID button for more than five seconds to enter
the BIOS progress mode
NOTE:
page by pressing F2 during system boot), press and hold the
System ID button for more than 15 seconds.
N/A The OCP NIC card supports OCP 3.0. The NIC ports are integrated
on the OCP card which is connected to the system board.
The NIC ports that are integrated on the LOM card provide network
connectivity which is connected to the system board.
PSU1 is the primary PSU of the system.
Icon Description
N/A The expansion card riser enables you to connect PCI Express
expansion cards. For more information , see the
installation guidelines
N/A Insert BOSS blank when BOSS module is not used.
N/A The expansion card riser enables you to connect PCI Express
expansion cards. For more information , see the
installation guidelines
N/A The expansion card riser enables you to connect PCI Express
expansion cards. For more information , see the
installation guidelines
N/A Cold coolant flows into the system from one tube and hot coolant
leaves the system from another tube.
N/A The expansion card riser enables you to connect PCI Express
expansion cards. For more information , see the
installation guidelines
PSU2 is the secondary PSU of the system.
The USB port is 4-pin, 2.0-compliant. This port enables you to
connect USB devices to the system.
The USB port is 9-pin and 3.0-compliant. This port enables you to
connect USB devices to the system.
If the server stops responding during POST, press and
To reset the iDRAC (if not disabled on the iDRAC setup
section.
section.
section.
section.
Expansion card
Expansion card
Expansion card
Expansion card