Dell PowerEdge R760 Installation And Service Manual page 138

NOTE: An 8 x 2.5-inch NVMe backplanes with fPERC H965i should be assembled outside and inserted into the system,
along with all necessary cables.
Figure 91. Configuration 15: 16 x 2.5-inch SAS/SATA with fPERC (HBA355i, H355, H755)
NOTE: Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 94. 16 x 2.5-inch SAS/SATA with fPERC (HBA355i, H355, H755)
Order
1
2
3
4
138 Installing and removing system components
From
SL3_CPU1_PA2 (signal connector on system
board)
SIG_PWR_1 (system board power connector)
CTRL_SRC_SB1 (fPERC controller connector)
SIG_PWR_2 (system board power connector)
To
CTRL_SRC_PA1 (fPERC controller
connector)
BP_PWR_1 (backplane power
connector)
BP_DST_SA1 (backplane signal
connector)
BP_PWR_1 (backplane power
connector)