System Battery; Replacing The System Battery - Dell PowerEdge R760 Installation And Service Manual

Table of Contents

Advertisement

Figure 229. Installing the BOSS-N1 card carrier
Next steps
1. Follow the procedure listed in the

System battery

This is a service technician replaceable part only.

Replacing the system battery

Prerequisites
WARNING:
There is a danger of a new battery exploding if it is incorrectly installed. Replace the battery only
with the same or equivalent type that is recommended by the manufacturer. Discard used batteries according to
the manufacturer's instructions. See the Safety instructions that came with your system for more information.
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. If applicable, disconnect the power or data cables from the expansion cards.
4.
Remove the expansion card
Steps
1. To remove the battery:
a. Use a plastic scribe to pry out the system battery.
CAUTION:
To avoid damage to the battery connector, you must firmly support the connector while installing
or removing a battery.
280
Installing and removing system components
After working inside your
Safety
instructions.
Before working inside your
risers.
system.
system.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E82s

Table of Contents