Appendix A; About The Display Events Section; Zone Activity Check Event Display; Zone Bypass Event Displays - Security Command XR20 User Manual

About the Display Events Section

This section of the User's Guide shows the Display Events items for
32-character keypad displays. While in the Display Events function,
use the COMMAND and Back Arrow keys to go forward or backward
through the list of events.
To view more information about each display, press the Select key
as directed in the explanations below.

Zone Activity Check Event Display

This displays the date and time the Zone Activity Check was
enabled or disabled.
16-Character Display
ACT ENABLED 2 1017
32-Character Display
5:18P 10/17 10/ 17
ACT DISABLED
Activity Check Event Types - There are 3 event types:
ACT DISABLED ACT ENABLED
28

Appendix A

Description
The Zone Activity Check was
enabled on October 17.
Description
The Zone Activity Check was
disabled on October 17, at 5:18
PM.
NO ZONE ACTIVITY
XR20 User's Guide

Zone Bypass Event Displays

This displays the bypassing of system zones.
16-Character Display
10 BYPS 12 1017
32-Character Display
BYP 5:18P 10/ 17
EAST WINDOW
Bypass Event Types - There are 3 event types:
BYP - Bypass RST - Restore
Note: You may sometimes see the user as SWG. This is short for
Swinger Bypass which is an automatic function that allows the
system to bypass a zone.
Description
Zone 10 bypassed by user 12.
Press the left Select key for the
zone name and the right Select
key for the time.
Description
The east window zone was
bypassed. Press a Select key
for the zone number and user
number. Press again for the
user name.
FRC - Force Arm
System Setup