Install The Access Point On A Wall Using Mbo-Art02 Articulating Mounting Bracket - Extreme Networks AP5050U Installation Manual

Install the Access Point on a Wall Using MBO-ART02
Articulating Mounting Bracket

Install the Access Point on a Wall Using MBO-ART02 Articulating Mounting Bracket

About This Task
Table 12: Hardware requirements for MBO-ART02 articulating mounting bracket wall installation
Quantity
1
1
6
Note
When using the MBO-ART02 articulating mounting bracket, set the minimum downward tilt
to less than 20 degrees to prevent water ingress.
To install the access point on a wall:
32 ExtremeWireless™ 802.11ax Wi-Fi 6E Outdoor AP5050U Access Point
Item
Access point
MBO-ART02 articulating mounting bracket
M6 hex-head screws
Two M6 hex-head screws to attach the MBO-ART02 to the access
point.
Four M6 hex-head screws to attach the MBO-ART02 bracket to the
wall.
Install the Access Point