AP5050U Overview
IQ Engine Status LED Activity
•
Dark: Power is Off.
•
Solid white: The device power is on and the access point is ready to use. The device has
successfully established a Control And Provisioning of Wireless Access Points (CAPWAP) connection
to ExtremeCloud IQ and is operating normally.
•
Slow-blinking white: The device has a CAPWAP connection to ExtremeCloud IQ, but is operating on
802.3at power instead of 802.3bt power.
•
Solid amber: The device power is on and the access point is in boot up mode, or is running without a
CAPWAP connection.
•
Slow-blinking amber: The device has no CAPWAP connection to ExtremeCloud IQ, and is operating
on 802.3at power instead of 802.3bt power.
•
Fast-blinking amber: The device is updating its IQ Engine firmware.
ExtremeCloud IQ Controller Status LED Activity
•
Dark: The LED power is off or the LED has been de-activated.
•
Solid white: The device is booting or already taken over by the controller.
•
Slow-blinking white: The device is in the process of being taken over by the controller or has failed to
be taken over by the controller.
•
Flashing fading white: Configuration pushes down to access point from controller helping an user to
locate the access point location using visual inspection.
•
Solid amber: The access point is upgrading its firmware.
•
Fast-blinking amber: The access point is acquiring DHCP IP.
AP5050U Purchase Order Information
AP5050U order information
The AP5050U access point is sold by itself, and you must order the mounting brackets and accessories
separately for under seat, wall, or pole installations.
Part number
AP5050U-WW
ExtremeWireless™ 802.11ax Wi-Fi 6E Outdoor AP5050U Access Point
AP5050U Purchase Order Information
Description
Outdoor tri-radio WiFi 6E access point (4x4:4),
2.4 GHz, 5GHz, 6GHz, and multirate port, internal
omni antennas.
Domain: World SKU
13