Supported Accessories; Power Profile - Extreme Networks AP5050U Installation Manual

AP5050U Overview

Supported Accessories

The table below lists the accessories available for your access point. For additional information, see
802.11ax and Cloud Access Points
Table 4: Available Accessories
Accessory
ACC-CAT6-LAN-GSKT
ACC-WIFI-MICRO-USB
EIO-03-SP
EIO-04
EIO-GASKET
KT-147407-02
KT-150173-01
MBO-ART02
30520

Power Profile

The following table shows the power profile for the AP5050U . Use this information when you install the
device.
Table 5: AP5050U Power Profile
2.4G RF
5G RF
Accessories.
Description
A black gasket.
Micro USB cable
A wireless access point service
panel.
An under-seat mounting
solution.
Spacer for use in stadiums.
A stainless steel hardware kit
for mounting access points
outdoors.
A 12-inch extension arm for pole
and wall mounting.
A wall mounting bracket with +/-
80-degree that can be adjusted
in 20-degree increments. It also
has a 2-axis tilt and 10 inch
extension.
A 10 inch Unistrut mounting
bracket with +/- 80-degree, a
2-axis tilt and a 7 - 10-inche
extension. It can be adjusted in
10-degree increments.
WS-MBO-POLE01. A pole
mounting bracket.
AT profile
18dBm, 4×4
18dBm, 4×4
ExtremeWireless™ 802.11ax Wi-Fi 6E Outdoor AP5050U Access Point

Supported Accessories

Comment
For use with a CAT6 and CAT6A
cable.
Used for troubleshooting issues.
Protects the LAN gland side of
the access point.
-
Stops large objects from getting
wedged under the access point.
Use this bracket for outdoor use.
Use this arm when a standoff
distance is required. It provides
a minimum standoff distance of
twelve inches and helps avoid
interference with the antennas.
Use this bracket for outdoor use.
Use this bracket for outdoor use.
Used with MBO-ART02 for pole
mounting the MBO-ART02.
BT profile
18dBm, 4×4
18dBm, 4×4
11