Install The Access Point - Extreme Networks AP5050U Installation Manual

Install the Access Point

Installation Do's and Don'ts
Access Point Bracket Usage and Mounting Options
Install the Access Point Under-Seat
Install the Access Point on a Wall
Install the Access Point on a Pole
Install the Plastic Service Panel on the Access Point
Secure the Access Point after Installation
Power or Pressure Washing Guidelines
Before You Begin
Ensure that the following items are available:
Quantity
About This Task
The AP5050U access point can be installed under a seat, under a bench, on a wall, or on a pole. The
AP5050U Purchase Order Information
access point bracket for your installation needs.
Note
The access point ships with two black gaskets in the box for use with Category 6 (CAT
6) Ethernet cables with a cable diameter from 6.0mm to 9.2mm. This includes unshielded
twisted-pair (UTP) Cat 6 cables. Store these gaskets in a safe place if you do not use them
right away.
The access point has light-gray gaskets pre-installed in the access point glands. The light-gray
gasket handles all CAT 5 and CAT 5E cables, with a cable diameter range from 4.5mm to
6.0mm.
Procedure
1. Review the
on page 18
on page 21
on page 26
on page 34
Item
1 AP5050U access point
1 Quick Reference Guide
on page 13 gives you more details about choosing the right
purchase order information.
ExtremeWireless™ 802.11ax Wi-Fi 6E Outdoor AP5050U Access Point
on page 20
on page 42
on page 44
on page 45
17