System Settings - Siemens SIMATIC PCS7 Manual

System
settings
General
Colors
Font
Batch flexible , Manual
C79000-G7076-C650-02
Select the 'Configure' menu and then 'System settings'.
You will now see the system settings data which consist of the index cards
marked General, Colors, Font and System variables:

System settings

General Colors
Default version:
Substructure levels:
Delete surplus substructures automatically
Load plant data only when required
Plausibility test: Always display warnings
Report opening of read-only recipes
Allow editing of recipes in the state 'Release canceled'
OK
Figure 3-25 System settings
Note
The following entries, modifications and so on relating to system settings
and described below can only be carried out by superusers (see User groups
and user privileges). In addition, system settings data will not be output
unless no other applications have been started.
This displays the BATCH version. You can also specify the number of
substructure levels here. Some other presets can also be made.
The setting for the colors made here applies to all outputs of the recipe editor
and of batch control within the same BATCH project. The dialog box
'Colors' is shown and displayed on Page 4-14.
The font setting made here applies to all outputs of the recipe editor and of
batch control within the same BATCH project.
BATCH flexible Object Manager
Font System variables
Cancel Help
3-43