Operations In The Batch Status List - Siemens SIMATIC PCS7 Manual

Operations in the
batch status list
Table 5-1

Operations in the batch status list

Operation
Set The batches are given the status 'blocked'
block
Cancel The batches are given the status 'released'
release
Delete Batches are no longer displayed in the batch
entry status list. They are retained in the database.
Automatic The starting mode of the batch can be switched
starting from 'Manual' to 'Automatic'.
mode
Manual The starting mode of the batch can be switched
starting from 'Automatic' to 'Manual'.
mode
Open A batch can be opened by double-clicking on
it. In other words, in the batch window the
control recipe of the batch is displayed in the
same way as with the recept editor
(corresponding to the preferences specified in
the 'Tools' menu).
Set The batches are chained as described in
chaining Chapter 6.3.3.
Cancel Chaining of the batch is canceled.
chaining
Object Display of the batch mask.
properties
Start Execution of the batch is started – in other
words, the control recipe is executed. If the
required apparatuses are not free at the starting
time, the batch will take on the status
'waiting'. Once the equipment has been
released, recipe execution is continued
automatically.
Batch flexible , Manual
C79000-G7076-C650-02
You can select one or more batches and then carry out the following actions
with the selected batches:
Action
Batch control
Requirement(s)
Batch status = 'released'
Batch status = 'blocked'
Batch status = 'finished', 'aborted',
'canceled' or 'completed'
Batch status = 'released' or
'blocked', starting mode 'Manual'
Batch status = 'released' or
'blocked', starting mode 'Automatic'
None
Batch status = 'released' or
'blocked',
the batch is not yet chained
Batch status = 'released' or
'blocked',
the batch is chained
None
Batch status = 'released'
5-9