Overview Of Batch Flexible Messages - Siemens SIMATIC PCS7 Manual

8.2 Operator and system messages
BATCH messages
Range of numbers
for BATCH
messages
Table 8-1

Overview of BATCH flexible messages

No. Type
1 OM Batch started (manual)
2 OM ** Batch started (automatic)
3 OM ** Batch finished
4 OM Batch aborted
5 OM Batch paused
6 OM Batch resumed
7–19 Reserve
20 OM ** AF %2 error
21 OM ** AF %2 error corrected
22 OM ** AF %2 activated
23 OM ** AF %2 running
24 OM AF %2 done
25 OM AF %2 aborted
26 OM AF %2 paused
27 OM AF %2 resumed
28 OM AF %2 run marker set
29 OM AF %2 run marker removed
30 OM AF %2 acknowledge operator instruction
31 OM AF %2 operator instruction acknowledged
32 OM AF %2 added
33 OM AF %2 removed
34 OM AF %2 replaces AF %5
Batch flexible , Manual
C79000-G7076-C650-02
Batch control informs the OS signaling system about all operator actions and
status changes during the running time of the batch. This makes it possible to
track the execution of a batch with the aid of BATCH messages in the OS
message window.
Message numbers are reserved in the OS signaling system for BATCH
flexible. If no messages have as yet been provided there, batch control will
look after this at startup. The OS_MELD_OFFSET system variable described
at the end of Chapter 3 must be taken into consideration in the message
numbers. The following messages are generated by BATCH flexible:
Event
Messages
Auxiliary process values *
2 = AF-ID
2 = AF-ID
2 = AF-ID
2 = AF-ID
2 = AF-ID
2 = AF-ID
2 = AF-ID
2 = AF-ID
2 = AF-ID
2 = AF-ID
2 = AF-ID
2 = AF-ID
2 = AF-ID new
2 = AF-ID old
2 = AF-ID new,
5 = AF-ID old
8-3