Siemens SIMATIC PCS7 Manual page 111

View menu
Zoom in
Zoom out
Normal size
Fit
Fit automatically
Select zoom
section
Align
left/centered/right
Display unit
Show label
Batch flexible , Manual
C79000-G7076-C650-02
All of the settings made via this menu only concern the current recipe and
do not change any preset values. The following operations are available:
With the + key you can blow up the SFC diagram of a recipe by approx. 10%
(see Note) of the current display. If you select an element in the recipe before
executing this function, the recipe will be displayed with the selected
element at the center.
With the – key you can reduce the SFC diagram of a recipe by approx. 10%
(see Note) of the current display.
By pressing the Home key you can set the SFC diagram of a recipe to normal
size, in other words, 100% (see Note). On the zoom bar this corresponds to
size 1.
Note
The percentages mentioned above in connection with zooming in, zooming
out and normal size, will not be correct unless the default settings in the
'Tools' menu correspond to these values.
With the 'Fit' function (activated by pressing the END key) you can increase
or reduce the size of the SFC diagram of a recipes until the complete recipe
is displayed in the window. This allows you an overview of all existing
elements in the recipe (automation functions, transitions, and so on).
You can also carry out this function by clicking on an icon on the tool bar.
This function has exactly the same effect at the 'Fit' function. Its advantage
is, however, that automatic fitting continues even after modifications or
expansion have been effected.
The section is enlarged until the window is filled.
The function 'Align centered' centers the recipe in the window, for example.
The automation functions always display the unit, regardless of whether
parameters for visualisation have been selected or not.
With the 'Show label' function you can toggle display of the comments in the
recipe on or off.
Recipe creation
4-15