Modifying Graphic Object Properties - Siemens DMS8000 MP4.60 Manual

3.8
Building Technologies
Fire Safety & Security Products
2. Select the up-arrow icon
 The text for the camera changes to bold/red/italics.
Note: The next three cameras (if available) display in red text and will be
displayed in the quad view. Any additional cameras associated to the point
display in black text.
To rearrange the order of the camera display, proceed as follows:
1. Select a camera in the Camera display list.
2. Use the up and down arrow icons
To delete a camera from the Camera display list., proceed as follows:
1. Select a camera.
2. Select the delete icon

Modifying graphic object properties

Each point or object you deposit on a map has a set of properties. You can modify
these properties to suit your needs by opening the related
To open the property window, double-click on the object. Alternatively, you can

also right-click and select Properties.
For easier and faster operation, the property window can be left open on your
screen while you work. Each time you select a different object on the screen, data
in the properties window will be updated to reflect the properties of that object.
You may also find it more convenient to work with the Auto-hide feature activated.
To activate and deactivate auto-hide, select the Auto-hide icon . When auto-hide
is active, the properties window will collapse when you are working showing only
the bar on your screen (this keeps it from blocking your view). To view the
properties window, simply move the mouse over the bar and it will expand to show
the entire properties window.
Note: Use the menu command View > Property Page to enable/disable the tabs
in the property page that appears right-clicking on any object.
Selecting objects
The selection tool allows a single or multiple object selection using by single-
clicking on an object, or drawing a rectangular shape around multiple objects.
Note that:
CTRL
Keeping key pressed allows you to select and then deselect (toggling)

objects for multiple selections;
ALT
Keeping key pressed allows you to select and then deselect (toggling)

objects on different layers.
When an object is selected, it appears covered by a grayed grid, delimited by few
black, squared dots.
Guide to map configuration
Modifying graphic object properties
to move the camera to the top of the list.
to move the camera in the list.
.
3
property window
.
23
A6V10062441_a_en
30.06.2013