Ipx Parameters (Default Profile) Screen - Netopia R6100 Reference Manual

8-22 User's Reference Guide
IPX parameters (default profile) screen
If you are using RFC1483 datalink encapsulation, the IPX Parameters (Default Profile) screen allows you to
configure various IPX parameters for ADSL connections established without an explicitly configured connection
profile:
NetBios Packet Forwarding:
Path Delay:
Incoming Packet Filter Set...
Outgoing Packet Filter Set...
Incoming SAP Filter Set...
Outgoing SAP Filter Set...
Periodic RIP Timer:
Periodic SAP Timer:
For details on setting up IPX Parameters see
"Security" on page 16-1.
IPX Parameters (Default Profile)
"IPX Setup" on page
Off
10
<<NONE>>
<<NONE>>
<<NONE>>
<<NONE>>
60
60
12-1. For details on setting up Filter Sets see