Table of Contents
Advertisement
10-28 User's Reference Guide
On a Netopia R6000 Series ADSL Router you can add up to 15 more connection profiles, for a total of 16,
although only one can be used at a time.
1.
Select Profile Name and enter a name for this connection profile. It can be any name you wish. For
example: the name of your ISP.
2.
Toggle the Profile Enabled value to Yes or No. The default is Yes.
3.
Select IP Profile Parameters and press Return. The IP Profile Parameters screen appears.
Address Translation Enabled:
IP Addressing...
Local WAN IP Address:
Local WAN IP Mask:
Remote IP Address:
Remote IP Mask:
Filter Set...
Remove Filter Set
Receive RIP:
Transmit RIP:
Configure IP requirements for a remote network connection here.
4.
Toggle or enter any IP parameters you require and return to the Add Connection Profile screen by pressing
Escape. For more information on NAT, see
page
11-1. For more information on IP addressing, see
The Local WAN IP Address is displayed for numbered or NAT profiles. The Local WAN IP Mask is displayed
for numbered profiles. The Remote IP Address and Remote IP Mask are displayed for unnumbered profiles.
5.
If you will be connecting with an IPX remote network, toggle IPX Enabled to Yes, and press Return.
Otherwise, accept the default No.
If you enable IPX routing, the IPX Profile Parameters menu item becomes available. Select IPX Profile
Parameters and press Return. The IPX Profile Parameters screen appears.
IP Profile Parameters
Yes
Unnumbered
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Both
v2 (multicast)
"Multiple Network Address Translation (MultiNAT)," beginning on
Appendix B, "Understanding IP Addressing."
Advertisement
Table of Contents
