Table of Contents
Advertisement
17-6 User's Reference Guide
The Telnet client screen appears.
Host Name or IP Address:
Control Character to Suspend:
Enter the IP Address/Domain Name of a host.
Enter the host name or the IP address in dotted decimal format of the machine you want to Telnet into and
press Return.
Either accept the default control character "Q" used to suspend the Telnet session, or type a different one.
START A TELNET SESSION becomes highlighted.
Press Return and the Telnet session will be initiated.
To suspend the session, press Control-Q or whatever other control character you specified.
Two new options will appear in the Telnet screen (not shown):
Resume Suspended Session – select if you want to go back to your Telnet session
Terminate Suspended Session – select if you want to end the session
Telnet
Q
START A TELNET SESSION
Advertisement
Table of Contents
