Table of Contents
Advertisement
8-8 User's Reference Guide
R6161 Multilink PPP-based Bonded ADSL (WAN Module 2) Setup
The Netopia R6000 Series offers Multilink PPP-based DSL Bonding support for R6161 ADSL routers. Multilink
PPP-based DSL Bonding allows your ISP to aggregate the speed of two separate DSL lines to create a single
virtual pipe of higher speed. It does require two separate DSL lines, each connected to one of the two WAN
interfaces on an R6161 Router. In configuring the second WAN interface on the R6161, the PVCs must be
defined for the second WAN circuit. You access this feature in the Choose Interface to Configure screen under
the WAN Setup menu.
When you select ADSL (WAN Module 2) Setup and press Return, the secondary WAN module screen appears.
Display/Change Circuit...
Add Circuit...
Delete Circuit...
Enter Information supplied to you by your telephone company.
The only configuration that is allowed is the configuration of PVCs. You configure the PVCs on WAN Line 2 in the
same way as for WAN Line 1. See
ADSL Line 2 Configuration
"Line configuration" on page
8-3.
Advertisement
Table of Contents
