Netopia R6100 Reference Manual page 52

Netopia r6100: reference guide
Table of Contents

Advertisement

7-6 User's Reference Guide
Address Translation Enabled:
IP Addressing...
Local WAN IP Address:
Local WAN IP Mask:
Remote IP Address:
Remote IP Mask:
PPP Authentication...
Send User Name:
Send Password:
PREVIOUS SCREEN
Enter basic information about your WAN connection with this screen.
1.
To enable address translation, toggle Address Translation Enabled to Yes (the default). For more
information on Network Address Translation, see
If you selected RFC1483 data link encapsulation in the ADSL Line Configuration screen, an IP Addressing
menu item appears allowing you to choose between Unnumbered and Numbered addressing. Numbered is
the default for ADSL. It assigns a unique IP address to the ADSL WAN interface, as required by most ISPs'
routers. Unnumbered may be used for simpler configurations such as point-to-point short haul applications.
2.
Select the editable field labeled Local WAN IP Address.
The default address is 0.0.0.0, which allows for dynamic addressing, when your ISP assigns an address
each time you connect. However, you can enter another specific address if you want to use static
addressing. In that case, enter the local WAN address your ISP gave you. Press Return.
3.
If you selected PPP data link encapsulation in the ADSL Line Configuration screen, a PPP Authentication
menu item appears. The authentication protocol and user name/password combinations you enter must
be assigned or agreed to in advance between you and your ISP. Select PPP Authentication and press
Return.
From the pop-up menu that appears, select the authentication method your ISP uses: PAP (Password
Authentication Protocol), CHAP (Challenge Handshake Authentication Protocol), or None.
PAP is the most common and requires you to enter a User Name and Password in the next two fields.
CHAP requires you to enter a Host Name and Secret in the next two fields.
4.
Press the Down arrow key until you reach NEXT SCREEN. Press Return to bring up the next screen.
Connection Profile 1: Easy Setup Profile
Chapter 10, "IP Setup," on page
Yes
Numbered
0.0.0.0
0.0.0.0
127.0.0.2
255.255.255.255
PAP
tonyf
******
NEXT SCREEN
10-1.

Advertisement

Table of Contents
loading

This manual is also suitable for:

R6131R6120R6161R6000 series

Table of Contents