Viewing Filter Sets; Modifying Filter Sets - Netopia R6100 Reference Manual

16-22 User's Reference Guide
Select a filter from the table and press Return. The Change Filter screen appears. The parameters in this
screen are set in the same way as the ones in the Add Filter screen (see
page 16-19).
Enter the IP specific information for this filter.
Deleting filters
To delete a filter, select Delete Input Filter or Delete Output Filter in the Add IP Filter Set screen to display a
table of filters.
Select the filter from the table and press Return to delete it. Press Escape to exit the table without deleting the
filter.
Viewing filter sets
To display a view-only list of filter sets, select Display/Change IP Filter Set in the IP Filter Sets screen.
Modifying filter sets
To modify a filter set, select Display/Change IP Filter Set in the IP Filter Sets screen to display a list of filter
sets.
Select a filter set from the list and press Return. The Change IP Filter Set screen appears. The items in this
screen are the same as the ones in the Add Filter screen (see
Change Filter
Enabled:
Forward:
Source IP Address:
Source IP Address Mask:
Dest. IP Address:
Dest. IP Address Mask:
Protocol Type:
Source Port Compare...
Source Port ID:
Dest. Port Compare...
Dest. Port ID:
"Adding filters to a filter set" on
No
No
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0
No Compare
0
No Compare
0
"Adding filters to a filter set" on page 16-19).