Table of Contents
Advertisement
10-2 User's Reference Guide
IP setup
Main
Menu
The IP Setup options screen is where you configure the Ethernet side of the Netopia R6000 Series. The
information you enter here controls how the router routes IP traffic.
Consult your network administrator or ISP to obtain the IP setup information (such as the Ethernet IP address,
Ethernet subnet mask, default IP gateway, and Primary Domain Name Server IP address) you will need before
changing any of the settings in this screen. Changes made in this screen will take effect only after the Netopia
R6000 Series is reset.
To go to the IP Setup options screen, from the Main Menu, select System Configuration, then Network
Protocols Setup, and then IP Setup.
The IP Setup screen appears.
Ethernet IP Address:
Ethernet Subnet Mask:
Define Additional Subnets...
Default IP Gateway:
Backup IP Gateway:
Primary Domain Name Server:
Secondary Domain Name Server:
Domain Name:
Receive RIP...
Transmit RIP...
LAN (EN Hub) Filter Set...
Remove Filter Set
Static Routes...
Network Address Translation (NAT)...
Set up the basic IP attributes of your Netopia in this screen.
Follow these steps to configure IP setup for your Netopia R6000 Series:
Select Ethernet IP Address and enter the IP address for the Netopia R6000 Series's Ethernet port.
Select Ethernet Subnet Mask and enter the subnet mask for the Ethernet IP address that you entered in
the last step.
For unlimited-user models, if you desire multiple subnets select Define Additional Subnets. Twelve-user
models do not offer this option. If you select this item you will be taken to the IP Subnets screen. This
screen allows you to define IP addresses and masks for additional subnets. See
page 10-5
for details.
System
Configuration
IP Setup
192.128.117.162
255.255.255.0
192.128.117.163
0.0.0.0
0.0.0.0
0.0.0.0
yourdomain.com
Both
Off
Network
Protocols
IP Setup
Setup
IP Address Serving...
Filter Sets...
"IP subnets" on
Advertisement
Table of Contents
