Table of Contents
Advertisement
7-8 User's Reference Guide
IP parameters (default profile) screen
If you are using RFC1483 datalink encapsulation, the IP Parameters (Default Profile) screen allows you to
configure various IP parameters for ADSL connections established without an explicitly configured connection
profile:
Address Translation Enabled:
Filter Set (Firewall)...
Remove Filter Set
Receive RIP:
Transmit RIP:
Return/Enter accepts * Tab toggles * ESC cancels.
For an ADSL link, Network Address Translation (NAT) is disabled by default in the Default Profile. You can enable
it by toggling to Yes. For details on setting up IP Parameters see
Scheduled connections
Scheduled connections are useful for PPPoE, PPTP, and ATMP connection profiles.
To go to the Scheduled Connections screen, select Scheduled Connections in the WAN Configuration screen.
IP Parameters (Default Profile)
Main
Menu
No
Both
Off
"IP Setup" on page
WAN
Configuration
8-2.
Scheduled
Connections
Advertisement
Table of Contents
