Table of Contents
Advertisement
6.
Select IP Profile Parameters and press Return. The IP Profile Parameters screen appears.
Address Translation Enabled:
IP Addressing...
NAT Map List...
NAT Server List...
Local WAN IP Address:
Local WAN IP Mask:
Remote IP Address:
Remote IP Mask:
Filter Set...
Remove Filter Set
RIP Profile Options...
Configure IP requirements for a remote network connection here.
7.
Toggle or enter any IP Parameters you require and return to the Add Connection Profile screen by pressing
Escape. For more information, see
(MultiNAT)" on page
Note: The NAT Map List Easy-PAT List and NAT Server List Easy-Servers are the defaults and should be left
unchanged unless they have been deliberately modified.
8.
If you will be connecting with an IPX remote network, toggle IPX Enabled to Yes and press Return.
Otherwise, accept the default No.
If you enable IPX routing, an IPX Profile Parameters menu item becomes available. Select IPX Profile
Parameters and press Return. The IPX Profile Parameters screen appears.
IP Profile Parameters
"IP Setup" on page 10-1
11-1.
WAN and System Configuration 8-13
Yes
Numbered
Easy-PAT List
Easy-Servers
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
and
"Multiple Network Address Translation
Advertisement
Table of Contents
