Localtalk Setup - Netopia R6100 Reference Manual

AppleTalk nodes will appear. If you do not set a default zone, the first zone you create will be the default
zone.
You can also set the range of EtherTalk Phase II network numbers. Select Net Low and enter the lower limit
of the network number range. Select Net High and enter the upper limit of the range.
Select the Seeding pop-up menu and choose the seeding method for the Netopia R6000 Series to use.
(See "Routers and seeding" on page
You have finished configuring EtherTalk Phase II.

LocalTalk setup

For instructions on making the physical connections for LocalTalk, see
page 4-5.
In the AppleTalk Setup screen, select LocalTalk Setup and press Return. The LocalTalk Setup screen appears.
LocalTalk Enabled:
LocalTalk Zone Name:
LocalTalk Net Number:
Seeding...
Use this screen to set up the LocalTalk Port Routing attributes.
If you are using LocalTalk with the Netopia R6000 Series, select LocalTalk Enabled and make sure
LocalTalk is set to On, which is the default.
Note: Since the LocalTalk connector attaches to the Auxiliary port on the router, that port will no longer be
available for an external modem.
Select LocalTalk Zone Name and enter a new or existing zone name.
Note: Your LocalTalk network may already have a zone and network number in place. For the Netopia
R6000 Series's LocalTalk port to be part of your LocalTalk network, it must have a network number and
zone name that matches the values in use on the LocalTalk network.
13-3).
LocalTalk Setup
On
Unnamed
33126
Soft-Seeding
AppleTalk Setup 13-7
"Connecting to a LocalTalk network" on