Table of Contents
Advertisement
8-12 User's Reference Guide
3.
Select Data Link Encapsulation and press Return. From the pop-up menu select PPP, RFC1483, ATMP,
PPTP, or IPsec. If you select PPP, the Data Link Options menu item is displayed; if you select RFC1483,
the Data Link Options item is hidden. PPTP, ATMP, and IPsec options are intended for use with Virtual
Private Network (VPN) profiles. For more information see
4.
If you chose PPP as your data link encapsulation method in the previous step, select Datalink Options and
press Return. The Datalink Options screen appears.
Data Compression...
Send Authentication...
Send User Name:
Send Password:
Receive User Name:
Receive Password:
Maximum Packet Size:
In this Screen you will configure the PPP/MP specific connection params.
Select Data Compression and press Return. The pop-up menu offers the choices of None, Ascend LZS, or
Standard LZS (the default). Unless you are otherwise specifically directed, you can accept the default.
Select Send Authentication and press Return.
From the pop-up menu that appears, select the authentication method your ISP uses, if any: PAP
(Password Authentication Protocol), CHAP (Challenge Handshake Authentication Protocol), or None.
PAP is the most common and requires you to enter a User Name and Password in the next two fields.
CHAP requires you to enter a Host Name and Secret in the next two fields.
You can specify user name and password for both outgoing and incoming calls. The Send User
Name/Password parameters are used to specify your identity when connecting to a remote location. The
Receive User Name/Password parameters are used when receiving dial-in clients such as via RAS
configuration.
5.
You can edit the Maximum Packet Size field, if you want packets limited to a lower value than 1500.
Return to the Add Connection Profile screen by pressing Escape.
"Virtual Private Networks (VPN)" on page
Datalink (PPP/MP) Options
Standard LZS
PAP
1500
15-1.
Advertisement
Table of Contents
