Table of Contents
Advertisement
5-8 User's Reference Guide
Using Classic Networking (MacTCP)
1.
Go to the Apple Menu. Select Control Panels and then Network.
2.
In the Network window, select EtherTalk.
3.
Go back to the Apple menu. Select Control Panels and then MacTCP.
4.
Select EtherTalk.
From the pull-down menu under EtherTalk, select an available zone; then click the More button.
In the MacTCP/More window select the Server radio button. If necessary, fill in the Domain Name Server
information given to you by your administrator.
5.
Restart the computer.
Note: More information about configuring your Macintosh computer for TCP/IP connectivity through a Netopia
R6000 Series can be found in Technote NIR_026, "Open Transport and Netopia Routers," located on the
Netopia Web site.
Advertisement
Table of Contents
