Table of Contents
Advertisement
8-16 User's Reference Guide
The Netopia R6000 Series permits configuring RIP parameters through the IP Profile Parameters RIP Profile
Parameters screen for Connection Profiles.
The three Routing Information Protocol (RIP) options, Receive RIP, Transmit RIP, and TX RIP Policy, are located in
the RIP Profile Parameters screen. To access the RIP Profile Parameters screen you navigate from the Main
Menu to WAN Configuration, Display/Change Connection Profile (or Add Connection Profile), and IP Profile
Parameters.
Main
Menu
You access the RIP Profile Parameters screen via the RIP Profile Options item on the IP Profile Parameters
screen.
Address Translation Enabled:
IP Addressing...
Negotiate LAN IP Addr/Mask:
Remote IP Address:
Remote IP Mask:
Filter Set...
Remove Filter Set
RIP Profile Options...
Configure IP requirements for a remote network connection here.
When you select RIP Profile Options and press Return, the RIP Profile Parameters screen appears.
WAN
Configuration
IP Profile Parameters
Display/Change
Connection Profile
No
Unnumbered
Yes
127.0.0.2
255.255.255.255
NetBIOS Filter
IP Profile
Parameters
Advertisement
Table of Contents
