Netopia R6100 Reference Manual page 279

Status: The current status of the Ping test. This item can display the status messages shown in the able below:
Message
Resolving host name
Can't resolve host name
Pinging
Complete
Cancelled by user
Destination unreachable from
w.x.y.z
Couldn't allocate packet buffer
Couldn't open ICMP port
Packets Out: The number of packets sent by the Ping test.
Packets In: The number of return packets received from the target host. To be considered on time, return
packets are expected back before the next packet in the sequence of Ping packets is sent. A count of the
number of late packets appears in parentheses to the right of the Packets In count.
In the example that follows, a Netopia R6000 Series is sending Ping packets to another host, which responds
with return Ping packets. Note that the second return Ping packet is considered to be late because it is not
received by the Netopia R6000 Series before the third Ping packet is sent. The first and third return Ping
packets are on time.
Finding the IP address for the domain name-style address
IP address can't be found for the domain name–style address
Ping test is in progress
Ping test was completed
Ping test was cancelled manually
Ping test was able to reach the router with IP address w.x.y.z,
which reported that the test could not reach the final
destination
Couldn't proceed with Ping test; try again or reset system
Couldn't proceed with Ping test; try again or reset system
Utilities and Diagnostics 17-3
Description