Config Diffserv Class Match Every; Config Diffserv Class Match Ipdscp - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

config diffserv class match every

This command adds to the specified class definition a match condition whereby all packets are
considered to belong to the class. The
optional parameter has the effect of negating this match condition for the class (i.e.,
[exclude]
none of the packets are considered to belong to the class).
Default
Format

config diffserv class match ipdscp

This command adds to the specified class definition a match condition based on the value of the IP
DiffServ Code Point (DSCP) field in a packet, which is defined as the high-order six bits of the
Service Type octet in the IP header (the low-order two bits are not checked). The
the name of an existing DiffServ class. The optional
negating this match condition for the class (i.e., match all IP DSCP values except for what is
specified here).
The value is specified as either an integer from 0 to 63, or symbolically through one of
<dscpval>
the following keywords:
af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef
Note: The ipdscp, ipprecedence, and iptos match conditions are alternative ways to specify a
match criterion for the same Service Type field in the IP header, but with a slightly different user
notation.
Note: To specify a match on all DSCP values, use the config diffserv class match iptos command
with set to 0 and
<tosbits>
Default
Format
9-8
<classname>
none
config diffserv class match every <classname>
[exclude]
af11, af12, af13, af21, af22, af23, af31, af32, af33, af41,
set to 03 (hex).
<tosmask>
none
config diffserv class match ipdscp <classname>
<dscpval> [exclude]
202-10009-01
is the name of an existing DiffServ class. The
parameter has the effect of
[exclude]
.
is
<classname>
Differentiated Services