Config Diffserv Policy Expedite Percent; Config Diffserv Policy Mark Cos - NETGEAR ProSafe GSM7312 User Manual

Layer 3 managed switch software
Hide thumbs Also See for ProSafe GSM7312:
Table of Contents

Advertisement

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

config diffserv policy expedite percent

This command identifies the maximum guaranteed amount of bandwidth to be reserved for the
specified class instance within the named policy using a relative rate notation. The
and
are the names of an existing DiffServ policy and class, respectively. The
<classname>
committed information rate is specified as a percentage of total link capacity and is an integer from
1 to 100. The optional committed burst size is specified in kilobytes (KB) as an integer from 1 to
128, with a default of 4.
Note: The actual bandwidth allocation does not occur until the policy is attached to an interface in
a particular direction.
Note: The expedite kbps and percent commands are alternative ways to specify the same expedite
policy attribute.
Format
Restrictions
Policy Type
Incompatibilities

config diffserv policy mark cos

This command marks all packets for the associated traffic stream with the specified class of
service value in the priority field of the 802.1p header. If the packet does not already contain this
header, one is inserted. The
DiffServ policy and class, respectively. The CoS value is an integer from 0 to 7.
Format
Policy Type
9-18
config diffserv policy expedite percent <policyname>
<classname> <1-100> [1-128]
The sum of the committed information rate values for all bandwidth and
expedite commands defined within a policy must not exceed the available link
bandwidth of the interface to which that policy is assigned. Violation of this
requirement shall prevent successful attachment of a policy to the interface, or
shall cause this command to fail if the policy is already in service on one or
more interfaces.
Out
Bandwidth (all forms), Shape Peak
and
<policyname>
<classname>
config diffserv policy mark cos <policyname>
<classname> <0-7>
Out
202-10009-01
<policyname>
are the names of an existing
Differentiated Services

Advertisement

Table of Contents
loading

Table of Contents