Show Diffserv Policy Summary - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Exceed DSCP Value
Exceed IP Precedence Value This field shows the IP Precedence mark value if this action is markprec.
Non-Conform Action
Non-Conform DSCP Value
Non-Conform IP Precedence Value This field displays the IP Precedence mark value if this action is
Bandwidth
Expedite Burst Size (KBytes) This field displays the maximum guaranteed amount of bandwidth reserved in
Shaping Average
Shape Committed Rate (Kbps) This field is displayed if average or peak rate shaping is in use. It displays the
Shape Peak Rate (Kbps)
Random Drop Minimum Threshold This field displays the RED minimum threshold.This is not displayed if
Random Drop Maximum Threshold This field displays the RED maximum threshold.This is not displayed if
Random Drop Maximum Drop Probability This field displays the RED maximum drop probability.This is
Random Drop Sampling Rate This field displays the RED sampling rate.This is not displayed if the queue
Random Drop Decay Exponent This field displays the RED decay exponent.This is not displayed if the queue

show diffserv policy summary

This command displays a list of all defined DiffServ policies. This command takes no options.
Format
show diffserv policy summary
Policy Name
Policy Type
Class Members
9-32
This field shows the DSCP mark value if this action is markdscp.
The current setting for the action taken on a packet considered to not conform to
the policing parameters. This is not displayed if policing not in use for the class
under this policy.
This field displays the DSCP mark value if this action is markdscp.
markprec.
This field displays the minimum amount of bandwidth reserved in either percent
or kilobits-per-second.
either percent or kilobits-per-second format.
This field is displayed if average shaping is in use. Indicates whether average or
peak rate shaping is in use, along with the parameters used to form the traffic
shaping criteria, such as CIR and PIR. This is not displayed if shaping is not
configured for the class under this policy.
shaping committed rate in kilobits-per-second.
This field is displayed if peak rate shaping is in use. It displays the shaping peak
rate in kilobits-per-second.
the queue depth management scheme is not RED.
the queue depth management scheme is not RED.
not displayed if the queue depth management scheme is not RED.
depth management scheme is not RED.
depth management scheme is not RED.
The name of this policy. (Note that the order in which the policies are displayed
is not necessarily the same order in which they were created.)
The policy type, namely whether it is an inbound or outbound policy definition.
List of all class names associated with this policy.
202-10009-01
Differentiated Services