Config Diffserv Policy Police Action Exceed Drop; Config Diffserv Policy Police Action Exceed Markdscp - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
This command can be issued at any time, but is only meaningful within the context of one of the
police simple, singlerate, or tworate command attributes defined for this class instance.
Format
Policy Type

config diffserv policy police action exceed drop

This command sets the action taken on excess traffic to
tworate) currently configured for the specified class in this policy. The
are the names of an existing DiffServ policy and class, respectively.
<classname>
This command can be issued at any time, but is only meaningful within the context of one of the
police singlerate or tworate command attributes defined for this class instance.
Format
Policy Type

config diffserv policy police action exceed markdscp

This command sets the action taken on excess traffic to
(singlerate, tworate) currently configured for the specified class in this policy. The
and are the names of an existing DiffServ policy and class, respectively.
<classname>
A value is required and is specified as either an integer from 0 to 63, or symbolically
<dscpval>
through one of the following keywords:
af33, af41, af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef.
This command can be issued at any time, but is only meaningful within the context of one of the
police singlerate or tworate command attributes defined for this class instance.
Format
Policy Type
Differentiated Services
config diffserv policy police action conform send
<policyname> <classname>
In
config diffserv policy police action exceed drop
<policyname> <classname>
In
af11, af12, af13, af21, af22, af23, af31, af32,
config diffserv policy police action exceed markdscp
<policyname> <classname> <dscpval>
In
202-10009-01
for the police command (singlerate,
drop
<policyname>
for the police command
markdscp
and
<policyname>
9-21