Acl Commands; Show Commands; Show Acl Summary; Show Acl Detailed - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

Show Commands

The show commands show the current settings for a command.

show acl summary

This command displays a summary of the Access Control Lists (ACLs) that are associated with
interfaces in the system.
Format
ACL ID
Rules
Interface(s)
Direction

show acl detailed

This command displays an Access Control List (ACL) and all of the rules that are defined for the
ACL. The is the number used to identify the ACL.
<aclid>
Format
Rule Number
Action
Protocol
Source IP Address
Source IP Mask
Source Ports
Destination IP Address
Destination IP Mask
Destination Ports

ACL Commands

show acl summary
The ACL identifier.
The number of rules that are associated with this ACL.
The interface in Slot.Port format that are associated with this ACL.
The packet filtering direction for the ACL on the interface. The possible values
are 'inbound' and 'outbound'.
show acl detailed <aclid>
The number identifier for each rule that is defined for the ACL.
The action associated with each rule. The possible values are Permit or Deny.
The protocol to filter for this rule.
Thee source IP address for this rule.
The source IP Mask for this rule.
The source port range for this rule.
The destination IP address for this rule.
The destination IP Mask for this rule.
The destination port range for this rule.
202-10009-01
Chapter 10
ACL Commands
10-1