User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
config diffserv policy police action exceed markprec
This command sets the action taken on excess traffic to
(singlerate, tworate) currently configured for the specified class in this policy. The
and
are the names of an existing DiffServ policy and class, respectively.
<classname>
An IP Precedence value is required and is specified as an integer from 0-7.
This command can be issued at any time, but is only meaningful within the context of one of the
police singlerate or tworate command attributes defined for this class instance.
Format
Policy Type
config diffserv policy police action exceed send
This command sets the action taken on excess traffic to
tworate) currently configured for the specified class in this policy. The
are the names of an existing DiffServ policy and class, respectively.
<classname>
This command can be issued at any time, but is only meaningful within the context of one of the
police singlerate or tworate command attributes defined for this class instance.
Format
Policy Type
config diffserv policy police action nonconform drop
This command sets the action taken on nonconforming traffic to
(simple, singlerate, tworate) currently configured for the specified class in this policy. The
and
<policyname>
<classname>
respectively.
This command can be issued at any time, but is only meaningful within the context of the police
simple, singlerate, or tworate command attributes defined for this class instance.
Format
Policy Type
9-22
config diffserv policy police action exceed markprec
<policyname> <classname> <0-7>
In
config diffserv policy police action exceed send
<policyname> <classname>
In
are the names of an existing DiffServ policy and class,
config diffserv policy police action nonconform drop
<policyname> <classname>
In
202-10009-01
for the police command
markprec
for the police command (singlerate,
send
<policyname>
for the police command
drop
Differentiated Services
<policyname>
and