Command Line Interface Syntax; Cli Command Format - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
The Command Line Interface (CLI) syntax, conventions and terminology are described in this
section. Each CLI command is illustrated using the structure outlined below.

CLI Command Format

Commands are followed by values, parameters or both.
Example 1
config network parms <ipAddr> <netmask> [gateway]
• config network parms is the command name.
• <ipAddr> <netmask> are the required values for the command.
• [gateway] is the optional value for the command.
Example 2
config syslocation <location>
• config syslocation is the command name.
• <location> is the required parameter for the command.
Example 3
config lag deleteport <logical slot.port> <slot.port|all>
• config lag deleteport is the command name.
• <logical slot.port> <slot.port|all> are the required values for the
command.

Command Line Interface Syntax

Command Line Interface Syntax
202-10009-01
Chapter 5
5-1