Config Diffserv Class Match Protocol Keyword; Config Diffserv Class Match Protocol Number - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Note: In essence, this the "free form" version of the IP DSCP/Precedence/TOS match specification
in that the user has complete control of specifying which bits of the IP Service Type field are
checked.
Default
Format

config diffserv class match protocol keyword

This command adds to the specified class definition a match condition based on the IP Protocol of
a packet using a single keyword notation. The
class. The value for
<protocolkey>
below). The optional
[exclude]
class (i.e., match all IP Protocol numbers except for the one specified here).
The currently supported
<protocolkey> value of ip is interpreted to match all protocol number values.
Note: The protocol keyword and number commands are alternative ways to specify an IP protocol
value as a match criterion.
Default
Format

config diffserv class match protocol number

This command adds to the specified class definition a match condition based on the value of the IP
Protocol field in a packet using a numeric value notation. The
existing DiffServ class. The protocol number is a standard value assigned by IANA and is
interpreted as an integer from 0 to 255. The optional
negating this match condition for the class (i.e., match all IP Protocol numbers except for the one
specified here).
Note: This command does not validate the protocol number value against the current list defined
by IANA.
Note: The protocol keyword and number commands are alternative ways to specify an IP protocol
value as a match criterion.
9-10
none
config diffserv class match iptos <classname>
<tosbits> <tosmask> [exclude]
is one of the supported protocol name keywords (listed
parameter has the effect of negating this match condition for the
values are:
<protocolkey>
none
config diffserv class match protocol keyword
<classname> <protocolkey> [exclude]
202-10009-01
is the name of an existing DiffServ
<classname>
icmp, igmp, ip, tcp, udp
<classname>
parameter has the effect of
[exclude]
. Note that a
is the name of an
Differentiated Services