Config Diffserv Class Match Dstl4Port Range; Config Diffserv Class Match Dstmac - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Note: The dstl4port keyword, number, and range commands are alternative ways to specify a
destination layer 4 port range as a match criterion.
Default
Format

config diffserv class match dstl4port range

This command adds to the specified class definition a match condition based on the destination
layer 4 port of a packet using a numeric range notation. The
existing DiffServ class. Two layer 4 port numbers are required and together they specify a
contiguous port range. Each port number is an integer from 0 to 65535, but with the added
requirement that the second number be equal to or greater than the first. The optional
parameter has the effect of negating this match condition for the class (i.e., match all destination
layer 4 port numbers except for those within the range specified here).
Note: The dstl4port keyword, number, and range commands are alternative ways to specify a
destination layer 4 port range as a match criterion.
Default
Format

config diffserv class match dstmac

This command adds to the specified class definition a match condition based on the destination
MAC address of a packet. The
parameter is any layer 2 MAC address formatted as six, two-digit hexadecimal
<macaddr>
numbers separated by colons (e.g., 00:11:22:dd:ee:ff). The
address bit mask, which need not be contiguous, and is formatted as six, two-digit hexadecimal
numbers separated by colons (e.g., ff:07:23:ff:fe:dc). The optional
effect of negating this match condition for the class (i.e., match all destination MAC addresses
except for what is specified here).
Default
Format
Differentiated Services
none
config diffserv class match dstl4port number
<classname> <0-65535> [exclude]
none
config diffserv class match dstl4port range
<classname> <0-65535> <0-65535> [exclude]
is the name of an existing DiffServ class. The
<classname>
none
config diffserv class match dstmac <classname>
<macaddr> <macmask> [exclude]
202-10009-01
is the name of an
<classname>
parameter is a layer 2 MAC
<macmask>
parameter has the
[exclude]
[exclude]
9-7