User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
show router ospf lsdb summary
This command displays the link state database. This command takes no options. The information
below will only be displayed if OSPF is enabled.
Format
Router ID
Area ID
LSA Type
LS ID
Age
Sequence
Checksum
Options
show router ospf virtif detailed
This command displays the OSPF Virtual Interface information for a specific area and neighbor.
The <areaid> parameter identifies the area and the <neighbor> parameter identifies the neighbor's
IP Address.
Format
Area ID
Neighbor IP Address
Hello Interval
Dead Interval
Iftransit Delay Interval
Retransmit Interval
Authentication Type
show router ospf virtif summary
This command displays the OSPF Virtual Interface information for all areas in the system.
Format
Area Id
Neighbor
Hello Interval
Routing Commands
show router ospf lsdb summary
A32 bit dotted decimal number representing the LSDB interface.
The IP address identifying the router ID.
The types are: router, network, ipnet sum, asbr sum, as external, group member,
tmp 1, tmp 2, opaque link, opaque area.
A number that uniquely identifies an LSA that a router originates from all other
self originated LSA's of the same LS type.
A number representing the age of the link state advertisement in seconds.
A number that represents which LSA is more recent.
The total number LSA checksum.
This is an integer. It indicates that the LSA receives special handling during
routing calculations.
show router ospf virtif detailed <areaid> <neighbor>
The area id of the requested OSPF area.
The neighbor IP Address that is entered.
The configured hello interval for the OSPF virtual interface.
The configured dead interval for the OSPF virtual interface.
The configured transit delay for the OSPF virtual interface.
The configured retransmit interval for the OSPF virtual interface.
The configured authentication type of the OSPF virtual interface.
show router ospf virtif summary
The area id of the requested OSPF area.
The neighbor interface of the OSPF virtual interface.
The configured hello interval for the OSPF virtual interface.
202-10009-01
8-25