Config Acl Rule Match Protocol Keyword; Config Acl Rule Match Protocol Number; Config Acl Rule Match Srcip - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

config acl rule match protocol keyword

This command specifies the IP protocol of a packet as a match condition for an ACL rule
referenced by the
<aclid>
protocol using a single keyword notation and has the possible values of
and . A protocol keyword of
udp
Either this command or
an IP protocol value as a match criterion.
Format
config acl rule match protocol keyword <aclid> <rulenum> <proto-
colkey>

config acl rule match protocol number

This command specifies the protocol to filter for an ACL rule referenced by the
The
<rulenum>. <protocolnum>
number is a standard value assigned by IANA and is interpreted as an integer from 0 to 255.
Either this command or
an IP protocol value as a match criterion.
Format
config acl rule match protocol number <aclid> <rulenum> <protocol-
num>

config acl rule match srcip

This command specifies a packet's source IP Address and Mask as a match condition for an ACL
rule referenced by the
digit dotted-decimal numbers which represent the source IP Address and IP Mask, respectively.
Format
config acl rule match srcip <aclid> <rulenum> <ipaddr> <ipmask>
10-6
and
<rulenum>.
is interpreted to match all protocol number values.
ip
config acl match protocol number
parameter identifies the protocol by number. The protocol
config acl match protocol keyword
and
<aclid> <rulenum>.
202-10009-01
The parameter identifies the
<protocolkey>
commands can be used to specify
commands can be used to specify
The and
<ipaddr>
icmp, igmp, ip, tcp
and
<aclid>
parameters are 4-
<ipmask>
ACL Commands
,