Config Diffserv Policy Expedite Kbps - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Note: The actual bandwidth allocation does not occur until the policy is attached to an interface in
a particular direction.
Note: The bandwidth kbps and percent commands are alternative ways to specify the same
bandwidth policy attribute.
Format
Restrictions
Policy Type
Incompatibilities

config diffserv policy expedite kbps

This command identifies the maximum guaranteed amount of bandwidth to be reserved for the
specified class instance within the named policy using an absolute rate notation. The
and
<policyname> <classname>
respectively. The committed information rate is specified in kilobits-per-second (Kbps) and is an
integer from 1 to 4294967295. The optional committed burst size is specified in kilobytes (KB) as
an integer from 1 to 128, with a default of 4.
Note: The actual bandwidth allocation does not occur until the policy is attached to an interface in
a particular direction.
Note: The expedite kbps and percent commands are alternative ways to specify the same expedite
policy attribute.
Format
Restrictions
Policy Type
Incompatibilities
Differentiated Services
config diffserv policy bandwidth percent <policyname>
<classname> <1-100>
The sum of the committed information rate values for all bandwidth and
expedite commands defined within a policy must not exceed the available link
bandwidth of the interface to which that policy is assigned. Violation of this
requirement shall prevent successful attachment of a policy to the interface, or
shall cause this command to fail if the policy is already in service on one or
more interfaces.
Out
Expedite (all forms)
are the names of an existing DiffServ policy and class,
config diffserv policy expedite kbps <policyname>
<classname> <1-4294967295> [1-128]
The sum of the committed information rate values for all bandwidth and
expedite commands defined within a policy must not exceed the available link
bandwidth of the interface to which that policy is assigned. Violation of this
requirement shall prevent successful attachment of a policy to the interface, or
shall cause this command to fail if the policy is already in service on one or
more interfaces.
Out
Bandwidth (all forms), Shape Peak
202-10009-01
9-17