Config Router Id; Rip Commands; Show Router Rip Info; Show Router Rip Interface Detailed - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

config router id

This command sets a 4-digit dotted-decimal number uniquely identifying the router. To ensure
uniqueness, it defaults to the value of the switch's management IP address. If this value is not
configured, then the value of any active router interface IP address is used.
Format

RIP Commands

show router rip info

This command displays information relevant to the RIP router.
Format
Router ID
RIP Admin Mode
Global Route Changes
Global queries

show router rip interface detailed

This command displays information related to a particular RIP interface.
Format
Interface
IP Address
Send version
Receive version
RIP Admin Mode
Link State
Authentication Type
Authentication Key
Routing Commands
config router id <routerid>
show router rip info
A 32 bit dotted decimal number representing the interface.
RIP administrative mode of router RIP operation; enable activates and disable
de-activates the RIP ability for the switch. This is a configured value.
The number of route changes made by RIP to the IP Route Database.
The number of responses sent to RIP queries from other systems.
show router rip interface detailed <slot.port>
The unit slot.port identifying each interface. This is a configured value.
The IP source address used by the specified RIP interface. This is a configured
value.
The RIP version(s) used when sending updates on the specified interface. The
types are none, RIP-1, RIP-1c, RIP-2. This is a configured value.
The RIP version(s) allowed when receiving updates from the specified interface.
The types are none, RIP-1, RIP-2, Both. This is a configured value.
RIP administrative mode of router RIP operation; enable activates, disable de-
activates it. This is a configured value.
Indicates whether the RIP interface is up or down. This is a configured value.
The RIP Authentication Type for the specified interface. The types are none and
simple. This is a configured value.
The RIP Authentication Key for the specified interface. The actual key will be
**** to avoid compromising privacy. This is a configured value.
202-10009-01
8-11