Table of Contents
Advertisement
Calibration
Calibrating your G7 using your BG meter is optional. Use it to move your sensor reading closer to
your BG meter value.
Your sensor readings come from different fluids than your BG meter values, so they're unlikely
to be the same number. Neither number is as accurate as the lab test your doctor does.
To calibrate your G7 using your BG meter (optional):
Receiver
Blood Glucose
Log Blood Glucose
Use as Calibration
More Info
9 • Troubleshooting |
In the receiver, go to Menu >
Event > Blood Glucose.
Select Use as Calibration and
follow onscreen instructions to
enter the BG meter value as a
calibration.
Dexcom G7 Using Your Receiver
85
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the G7 and is the answer not in the manual?
Questions and answers
My G7 sensor gave me a not paired on the pump and the phone app about 10 mins into warmup and keeps alerting that it’s not paired! Can’t find a way to stop the warmup on both pump and phone and just start new sensor then ask for a replacement
To stop the warmup process and start a new Dexcom G7 sensor after receiving a "not paired" alert on the pump and phone app:
1. Delete and reinstall the G7 app to resolve the pairing loop issue.
2. Restart the app and go through the setup screens again.
3. Begin the sensor setup on your pump first, especially if that is your preferred device.
4. When prompted, manually enter the sensor pairing code in the app.
5. If overlapping a sensor, insert and start the new sensor before the old one ends. This can help avoid a warmup delay.
These steps can help bypass the pairing issue and continue using the sensor without waiting for the full warmup.
This answer is automatically generated