Table of Contents
Advertisement
Logging BG meter values or calibrating
Your healthcare provider may ask you to keep track of your BG meter values, or you may want
to calibrate your G7.
To get an accurate BG meter value, follow these steps:
1. Wash your hands with soap and water
2. Dry your hands
3. Take a fingerstick
To log a BG meter value or calibrate your G7:
Blood Glucose
Log Blood Glucose
Use as Calibration
More Info
70
In the receiver, go to Menu > Event > Blood Glucose
Select Log Blood Glucose, or to use the BG meter value as a
calibration, select Use as Calibration. Follow onscreen
instructions.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the G7 and is the answer not in the manual?
Questions and answers
My G7 sensor gave me a not paired on the pump and the phone app about 10 mins into warmup and keeps alerting that it’s not paired! Can’t find a way to stop the warmup on both pump and phone and just start new sensor then ask for a replacement
To stop the warmup process and start a new Dexcom G7 sensor after receiving a "not paired" alert on the pump and phone app:
1. Delete and reinstall the G7 app to resolve the pairing loop issue.
2. Restart the app and go through the setup screens again.
3. Begin the sensor setup on your pump first, especially if that is your preferred device.
4. When prompted, manually enter the sensor pairing code in the app.
5. If overlapping a sensor, insert and start the new sensor before the old one ends. This can help avoid a warmup delay.
These steps can help bypass the pairing issue and continue using the sensor without waiting for the full warmup.
This answer is automatically generated