Dexcom G7 Manual

Sensor and applicator

• During setup, we'll show you how to use the applicator to insert the built-in sensor under your skin.
• The sensor sends a glucose reading to your receiver or other display device every 5 minutes.
• The sensor lasts up to 10 days with a 12-hour grace period.
  

Overpatch

After you insert the sensor, you can use the overpatch to help keep the sensor on your skin.

Receiver setup

1. Insert sensor
   
   • You must insert your sensor before pairing to the receiver.
   • For instructions go to Inserting Sensor in the sensor box.
2. Set up receiver
   • Press the Select button for 3-5 seconds to turn on sensor before pairing.
   • After inserting and pairing, follow local guidelines for throwing out the applicator and recycling the Dexcom packaging.
3. Sensor warmup
   
   Sensor warmup timer tells you when you'll start getting readings and alerts.
4. Your sensor session
   Go to Using Your Receiver in the receiver box.

Receiver navigation

The receiver screen tells you which button to use.

• To scroll faster hold down the Scroll button.
• To move to next field use the Select button.

Use up to 3 display devices

Get your glucose information on your phone, smartwatch, and the Dexcom receiver.
You can set up the phone app, the receiver, or both, in either order.
App or receiver may not be available in all regions.

Review Safety Information in product instructions found in the sensor box.

For Performance Characteristics go to the receiver box.

All graphics are representational. Your product may look different.

1-858-200-0200

dexcom.com

Documents / Resources

References

• Dexcom Continuous Glucose Monitoring | Dexcom

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Dexcom G7 Manual