Table of Contents
Advertisement
Travel with G7
Issue
You want to use your G7 when going through security or flying.
Solution
TSA Security check point
You can wear your G7 sensor when going through walk-through metal detectors and Advanced
Imaging Technology (AIT) body scanners. Or you can ask for hand-wanding or a full-body
pat-down and visual inspection. Ask for visual inspection of any part of the G7 in the baggage
scanning machine.
Most security check points require you to temporarily give up your receiver. When you are
without a display device in a security check point area, use your BG meter for treatment
decisions.
100
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the G7 and is the answer not in the manual?
Questions and answers
My G7 sensor gave me a not paired on the pump and the phone app about 10 mins into warmup and keeps alerting that it’s not paired! Can’t find a way to stop the warmup on both pump and phone and just start new sensor then ask for a replacement
To stop the warmup process and start a new Dexcom G7 sensor after receiving a "not paired" alert on the pump and phone app:
1. Delete and reinstall the G7 app to resolve the pairing loop issue.
2. Restart the app and go through the setup screens again.
3. Begin the sensor setup on your pump first, especially if that is your preferred device.
4. When prompted, manually enter the sensor pairing code in the app.
5. If overlapping a sensor, insert and start the new sensor before the old one ends. This can help avoid a warmup delay.
These steps can help bypass the pairing issue and continue using the sensor without waiting for the full warmup.
This answer is automatically generated
Lost G7 receiver in my house. How do I find it?