Table of Contents
Advertisement
Menu
Reports
Events
Settings
Information
Help
Replace Sensor
Stop Sensor Session
Power Off
3 • Screens |
Dexcom G7 Using Your Receiver
Reports: See summary reports (go to Reports chapter)
l
Events:
l
Enter events — like insulin doses and BG meter values
l
Use your BG meter value as a calibration (optional)
l
Settings:
l
Change alert settings (go to the Alerts chapter)
l
Set alerts to vibrate only or change their sounds
l
Pick a trend graph height
l
Change the screen brightness
l
Information:
l
See how much time you have left in your sensor session
l
and your pairing code
Test the speaker
l
Replace Sensor and Stop Sensor Session: Stop this sensor
l
and start a new one (go to the Next Sensor Session chapter)
Power off: Turn off the receiver — no sensor readings or
l
alerts when powered off
31
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the G7 and is the answer not in the manual?
Questions and answers
My G7 sensor gave me a not paired on the pump and the phone app about 10 mins into warmup and keeps alerting that it’s not paired! Can’t find a way to stop the warmup on both pump and phone and just start new sensor then ask for a replacement
To stop the warmup process and start a new Dexcom G7 sensor after receiving a "not paired" alert on the pump and phone app:
1. Delete and reinstall the G7 app to resolve the pairing loop issue.
2. Restart the app and go through the setup screens again.
3. Begin the sensor setup on your pump first, especially if that is your preferred device.
4. When prompted, manually enter the sensor pairing code in the app.
5. If overlapping a sensor, insert and start the new sensor before the old one ends. This can help avoid a warmup delay.
These steps can help bypass the pairing issue and continue using the sensor without waiting for the full warmup.
This answer is automatically generated