Table of Contents
Advertisement
T10FM
4.9 Aligning the stator (speed measuring system)
The stator can be mounted in any position (for example, "upside down"
installation is possible).
For perfect measuring mode, the slotted disc of the speed measuring system
must rotate at a defined position in the sensor pickup.
Axial alignment
There is a mark (orientation line) in the sensor pickup for axial alignment
(orientation line). When installed, the slotted disc should be exactly above this
orientation line. Divergence of up to "2 mm is permissible in measuring
mode (total of static and dynamic shift).
Fig. 4.9: Position of the slotted disc in the speed sensor
A0894-5.2 en
Slotted disc
Alignment lines
25
HBM
Advertisement
Table of Contents
